Specs
Training Day specs
Training Day specs sets out the machine, cutter and job parameters used during the session. It covers the stock types brought to the router, expected spindle ranges, hold-down method and the checks done before the first test pass.
Machine settings covered on the day
Training Day covers what is included in the session and the tooling involved during hands-on CNC instruction. Review the topics, machine focus and setup requirements before booking training for your team.
The session starts with what is actually being cut, whether that is MDF, plywood, solid timber, ACM or thin aluminium sheet. From there, the trainer works through cutter diameter, flute count, spindle speed, feed rate and depth per pass, with attention to dust extraction, chip evacuation and vacuum hold-down in South African workshop conditions.
Before cutting begins, the operator is taken through a machine-side inspection of rails, spoilboard condition, collet cleanliness and emergency stop function. A marked setup sheet can then stay at the control station so the team has the same zero point, tool length and warm-up routine for later shifts.
What the team reviews
Training Day specs gives your staff a clear record of the toolpath approach used in the hands-on session. That includes which bit profile was selected, where entry moves were placed, what finish was expected off the machine and which settings need adjustment when material density changes.
Plan a training booking for a router handover or refresher session using our contact form. Include the machine make, bed size, spindle power, control software and the parts your operators cut most often so the trainer can prepare the right focus areas.
- Spindle speed and feed rate notes
- Vacuum table and clamping checks
- Operator handover and setup guidance
Workshop conditions that change settings
Specs for a training session must reflect where the machine is running and how the workshop operates day to day. Inland dust levels, coastal corrosion risk, power interruptions and mixed operator experience all change how you approach warm-up, tool storage, restart checks and first-piece inspection.
In Durban and other coastal areas, bits, collets and holders need closer attention for surface rust and moisture after storage. Gauteng workshops often deal with finer dust loading on linear guides and extraction filters, while long cable runs and supply dips can affect VFD behaviour during a demonstration.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Information to have ready
Use Training Day for operator handovers, machine familiarisation and practical guidance on CNC paths and tooling selection.
Bring the material sample, any existing cut file, the current tooling list and notes on recurring cut issues such as edge breakout, burning or poor finish on small radii. If the machine has recent maintenance work, add that detail as well, especially where spindle runout, vacuum leaks or sensor faults may affect the training examples.
What our CNC Tooling customers say
Verified Google reviews